4/21/2024 0 Comments Linear iei keypad![]() ![]() This warranty shall expire two years after shipping date for DOOR-GARD keypads.Įxcept as stated above, IEI makes no warranties, either express or implied, as to any matter whatsoever, including, without limitation to, the condition of its products, their merchantability, or fitness for any particular purpose. The prox.pad provides standard access control functionality with the use of its two relays and two inputs for request to exit and door position. For new installations it is required that AccessBase. AccessBase V1.54 is a version upgrade for the V1.52 release. Put Contact Information Here: Company Name: Service Number: Contents Section 1: Features and Product Description Section 2. e3-telephone-entry-toolbox.zip (35 MB) AccessBase for Access Control Systems AM/II, AE-1, and AE-2. 212eM/242eM Standalone Keypad Installation/ Programming Manual This equipment is designed to be installed and serviced by security and lock industry professionals. IEI will not be liable to the purchaser or anyone else for incidental or consequential damages arising from any defect in, or malfunction of, its products. Linear’s prox.pad is a stand alone proximity reader and keypad that can be directly mounted to a single-gang electrical box or to most flat surfaces. e3-access-toolbox.zip (142 MB) e3 Telephone Entry Toolbox. IEI’s sole liability is limited to the repair or (at IEI’s option) the replacement of the defective product or part when sent to IEI’s facility (freight and insurance charges prepaid), after first obtaining IEI’s Return Merchandise Authorization. IEI does not assume any responsibility for damage or injury to person or property due to improper care, storage, handling, abuse, misuse, normal wear and tear, or an act of God. (IEI) warrants its products to be free from defects in material and workmanship, when they have been installed in accordance with the manufacturer’s instructions, and have not been modified or tampered with. On SE keypad, holes have also been spotted inside the front housing for additional LEDs (LEDs not included).To speed installation of the SE keypad, holes have been spotted on the inside the back housing for mounting to a wall or a single-gang electrical box.For use in extreme weather conditions, consult the factory for additional methods of protecting your keypad.This allows air to circulate and a place for condensation to drain. ![]() ![]() Do not seal the drain holes at the bottom of the keypad housing.Do not silicone the cover plate because the unit will not seal properly. This helps prevent water from entering the case and condensing on the circuit board. When mounting this unit outside, apply silicone to the area where the wires enter the case.The bi-color LED provided with the SE keypad illuminates red when the LockRelease relay is de-energized and green when the relay is de-energized.To avoid ESD (Electro-Static Discharge) interfering with the operation of the keypad, ground the housing to earth ground. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |